LT-853-6A with the standard RDM remote device management protocol, supports DMX512 signal bi-directional communication, achieves remote management of reading and writing DMX address (DMX master controller must recognize the RDM protocol). Realize 0-100% dimming or different
lighting effect; workable with single color, bi-color, RGB LED lamps.
Wiring Diagram:
* If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of each line
* An amplifier is needed when more than 32 decoders are connected, signal amplification should not be more than 5 times continuously
