T-8000A 8192pixels SPI Controller

T-8000A system features:
1. Support the rules and special-shaped handle.
2. 32—256 Gray level,Support software Gamma correction.
3. Eight--port output,every port can support 512-1024 pixels.
4. New T-8000A-TTL have a screen, the controller can be encrypted to limit the times of use.
5. Off-line (SD Card) control, can be multiple controllers used in combination, play back content stored in the SD card.
6. Compatible with single and dual ICs, if you control a single line IC LED lights, without being connected to the CLK line.
7. T-8000A-TTL store a maximum of 16 programs,copy multiple files to the SD card in order,after formatting the SD card as “FAT” format.6. The program must be named in orders ,just as :00_1.led, 01_1.led, 02_1.led.

NOTE:
1. When T-8000A controller control less than 512 lamps the frame rate can reach 30fps. When T-1000 controls more than 512 lamps and less than 1024 lamps the frame rate will slow down automatically.
2. In the 2012 production version of the T-8000A to add a Chinese flag on the surface, you must use the new software.  
3. Before copy files to SD card ,The SD card must be formatted as FAT format.

Specific parameters:

Memory card：

1) type：SD card（suggest using high-speed SD card）
2) Capacity：128MB—2GB
3) Format：FAT
4) Store file Format：*.led

Physical parameters：

1) Working temperature ：-30℃—85℃
2) Working voltage：DC5V
3) Working power：3W
4) Size：L200mm×W170mm×H50mm
5) Weight：1.5KG
6) Signal port：3pin connect port