12V-24V 3CH DMX512 Decoder
Model: LT-853-6A
LT-853-6A with the standard RDM remote device management protocol, supports DMX512 signal bi-directional communication, achieves remote management of reading and writing DMX address (DMX master controller must recognize the RDM protocol). Realize 0-100% dimming or different
lighting effect; workable with single color, bi-color, RGB LED lamps.
- Product Parameter:
Input Signal: DMX512, RDM
Input Voltage: 12~24Vdc
Current Load: 6A×3CH Max. 18A
Output Power: (0~72W...144W)×3CH Max.432W
DMX512 Socket: RJ45
Protection:Short circuit / Over current, recover automatically
Working Temp.: -30℃~65℃
Dimensions: L175×W42×H33mm
Package Size: L183×W48×H41mm
Weight(G.W.): 310g
Wiring Diagram:
* If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of each line
* An amplifier is needed when more than 32 decoders are connected, signal amplification should not be more than 5 times continuously
Skype
QQ
